Crystal Clear Hard type UV Light Resin 100g, 300g

Resin Glory UV resin is high quality crystal clear one-component UV glue which cures really fast under UV light/lamp. It is widely used for jewellery, bezel setting, embedding, casting, doming, sealing, bonding, adhesions, 3D painting and much more. Choose your project and have fun!

DIRECTIONS:

• Before starting, if resin was stored below 21C let it warm up.
• Use gloves at all times and work in a well ventilated room or use a respirator.
• Do a test patch to master the skills and techniques to avoid errors.
• The bonding surface must be kept clean, dry, free of water, dirt, oil stains, rust, etc
• Cure with a 6-48 watt UV lamp at a distance, around 2-4min. IMPORTANT, if possible, cure both sides 1-2min each side.
• Cure time in natural light: sunny day- 10-15min, cloudy day - 30-60min
• Pour up to a thickness of 2mm to avoid bubble formation and overheating. 
• For thicker pours apply in layers, cure both sides and repeat this step with each layer.
• If adding pigment dye, pls add the specially used for UV resin
• Coverage - 100g covers approximately 150cm2

Before starting, please read the full instructions on our website www.resin-glory.com/SDS-instructions and wear personal Protection as directed.

Avoid skin, eye contact, inhalation or ingestion.

• In case of skin contact: remove contaminated clothing and wash the affected area with soap and water for 15 min.
• In case of eye contact: remove contact lenses if necessary and flush with water repeatedly for 15 min and do not rub. Promptly seek medical attention.